Anisotropic Conductive Film (ACF) for Film On Glass for organic EL panels
Suitable for reliable connection of small-to-medium-sized organic EL panel displays (OLED) and film material.
Products Category Anisotropic Conductive Film
(ACF)
Please select the product name :
image

Product Name

 CP5720GT

Suitable use

 For small-to-medium-sized organic EL panels

Application

 AV / Game machines / Cellular phones 
/ Automobiles

Feature
  • Our unique insulating coating technology on a conductive particle takes optimum conductivity in vertical while it completely insulates in horizontal. Suitable for the fine pitch connection.
  • With an optimum thermal compression, it is possible to interconnect a large number of bumps with fine pitch at a time.
  • A proprietary adhesive composition with excellent performance for bonding 2 or 3 layer FPCs.
  • Conductive particles with excellent performance for bonding oxide-coated metal wiring.

Structure
Structure

Specification
Product Name CP5720GT
Type FOG
Connection material ITO Glass
TCP/COF/FPC
Minimum space (µm) *1 25
Minimum pitch (µm) *2 50
Minimum connection area (µm²) *3 -
Thickness (µm) 18
Conductive particles Type Ni plating on a polymer particle with insulation
Particle diameter (µmΦ) 4
Insulation coated particle Yes
ACF Laminating conditions Temperature (°C) *4 70 to 90
Time (sec) *5 1 to 3
Pressure (MPa) *6 0.5 to 1.5
Main bonding conditions Temperature (°C) *4 170 to 200
Time (sec) *5 8
Pressure (MPa) *7 2 to 4
*1 Minimum space: Space between neighboring circuits. *2 Minimum pitch: Total length of conductor width and space between neighboring circuits. *3 Minimum connection area: A contact area which needs to trap at least three particles (average -4.5δ) and where the faced conductor overlaps. *4 Temperature of ACF lamination and main bonding: It is not equipment temperature, but temperature of ACF. *5 Time of ACF lamination and main bonding: Time from the start of bonding to the point where the temperature reaches the target. *6 Pressure of ACF lamination: It is described as the area of ACF lamination. *7 Pressure of main bonding: The pressure at COG mounting is described as the total area of bumps. The pressure at FOG, FOB, and FOF mounting is described as the bonding area.

Application Example
Connection of small-to-medium-sized organic EL panels with film.
Application Example
Top of page
caution Note on the characteristic data given - Data on the characteristics of the products described in this page based on the results of evaluations carried out by the company. This does not guarantee that the characteristics of the product conform with your usage environment. Before use, review the usage conditions based on evaluation data obtained from the equipment and substrates actually used.