Anisotropic Conductive Film (ACF) for Film On Glass for large LCDs
Suitable for connection of ITO Glass and TCP or COF (FOG).
Products Category Anisotropic Conductive Film
(ACF)
Please select the product name :  
image

Product Name

 CP9920ISV/CP1720ISV

Suitable use

 For large LCDs

Application

 Computers / AV

Feature
  • A proprietary adhesive composition allows excellent adhesion for TCP and COF films.
  • Compatible for a long specification (up to 300 m).

Structure
Structure

Specification
Product Name CP9920ISV CP1720ISV
Type FOG FOG
Connection material ITO Glass ITO Glass
TCP/COF COF
Minimum space (µm) *1 20 20
Minimum pitch (µm) *2 50 50
Minimum connection area (µm²) *3 - -
Thickness (µm) 18 14
Conductive particles Type Au/Ni plating on a polymer core particle with insulation Au/Ni plating on a polymer core particle with insulation
Particle diameter (µmΦ) 4 4
Insulation coated particle Yes Yes
ACF Laminating conditions Temperature (°C) *4 70 to 90 70 to 90
Time (sec) *5 2 2
Pressure (MPa) *6 1 to 2 0.5 to 1.5
Main bonding conditions Temperature (°C) *4 180 to 200 180 to 200
Time (sec) *5 10 4
Pressure (MPa) *7 2 to 4 2 to 5
*1 Minimum space: Space between neighboring circuits. *2 Minimum pitch: Total length of conductor width and space between neighboring circuits. *3 Minimum connection area: A contact area which needs to trap at least three particles (average -4.5δ) and where the faced conductor overlaps. *4 Temperature of ACF lamination and main bonding: It is not equipment temperature, but temperature of ACF. *5 Time of ACF lamination and main bonding: Time from the start of bonding to the point where the temperature reaches the target. *6 Pressure of ACF lamination: It is described as the area of ACF lamination. *7 Pressure of main bonding: The pressure at COG mounting is described as the total area of bumps. The pressure at FOG, FOB, and FOF mounting is described as the bonding area.

Application Example
Interconnect of large LCDs with subsrates and films.
Application Example
Top of page
caution Note on the characteristic data given - Data on the characteristics of the products described in this page based on the results of evaluations carried out by the company. This does not guarantee that the characteristics of the product conform with your usage environment. Before use, review the usage conditions based on evaluation data obtained from the equipment and substrates actually used.