|
|
|
 |
|
|
Flex-Rigid printed circuit board |
| In pursuit of high density wiring and further thickness reductions, Flex-Rigid printed circuit board Contributes to the reduction in size and thickness required for electronic devices. |
|
 |
Flex-Rigid printed circuit board |
 |
|
|
Electronic circuits |
|
|
|
Computers / AV / Cellular phones / Automobiles |
|
|
|
- Designed for high density, fine and thin assemblies
- Impedance controlled for high frequency/high speed performance
- Environmentally conscious: halogen-free, heat-resistant water-soluble preflux, supporting lead-free solder
- Flat design up to the ends of the board as in rigid boards
- flying-tale shaping in which connector terminals are provided
|
|
|
| |
|
|
 |
|
Thickness(µm) |
Solder regist |
20 |
L1 Conductor |
30 |
Prepreg |
65 |
L2 Conductor |
30 |
Prepreg |
135.75.55 |
Cover lay film |
50.37.27 |
L3 Conductor |
18 |
Flex Core |
50.25 |
L4 Conductor |
18 |
Cover lay film |
50.37.27 |
Prepreg |
135.75.55 |
L5 Conductor |
30 |
Prepreg |
65 |
L6 Conductor |
30 |
Solder regist |
20 |
Total thickness(Standard): 0.70mm
Total thickness(Possible range for production): 0.51 to 0.75mm |
|
|
 |
The technical data in this document was acquired based on reliable tests however it shall not guarantee full performance of product nor data itself. (Only reference based on our testing vehicle) A user assumes to conduct total reliability tests by themselves and owe any responsibility under production. |
|
|
|
Flex-Rigid printed circuit board
