Products TOP
Products Category
  Adhesives and tapes
Double coated tapes
Single coated tapes
Adhesive
Sealant
  Functionality film
Coating material for optical disks
Window film
  Optics Materials
Optical film
  Electronic components and materials
Anisotropic Conductive Film(ACF)
Flex-Rigid printed circuit Board(Rigid-Flex printed circuit Board)
Self control protecter(SCP)
Touch panel

Film-Film type,resistive touch panel Film-Glass type,resistive touch panel

Application Category
Computer
AV
Game machine
Cellular phone
Automobile
Building materials
Logistics
Optical disk
About Our Products

Film-Glass type, resistive touch panel
High quality small touch panel for mobile devices.
Products Category Touch panel
Please select the product name :  
Film-Glass type, resistive touch panel

Suitable use

 Input device for displays

Application

 AV / Game Machines / Cellular phones

Features
  • Material design suitable for input using pen or a finger.
  • High durability for mobile devices.
  • Narrow frame suitable for reduction of equipment size.
  • Design customizable for your product's size and functions.
  • Original film type with rate for high transparency: Polarizer type with rate for low reflection.
   

Structure

Specification
Structure
Type FG Type
Main material PE base film-glass
Thickness At least 0.96 mm
Rate for transparency At least 82 %
Input method Polyethylene pen or finger
FPC Polyimide base, Cu wiring
Size 2 to 5 inches

Application Example
Application Example Suitable for equipment such as smart phones (Cellular phones※photo), PND (Personal Navigation Devices), DSC (Digital Still Cameras), and PDAs.
Top of page

Technical Data
Item Film-Glass Type
Standard voltage applied Rated 5 V (Passing current through a contact between upper and lower boards: less than 1 mA)
Resistance between terminals 150 Ω to 660 Ω
Linearity (Input position precision) Within 1.5% to 3.0 %
Input method Polyethylene pen (tip: R0.8) or finger
Surface hardness 2H or higher in pencil scratch hardness test (on the basis of JIS K5400, load: 2.94 N)
Load upon operation 0.8 N or lower (central input area)
Total light transmittance At least 82 % (on the basis of JIS K 7361-1)
Haze Not more than 1.5 % (on the basis of JIS K 7105)
Hitting durability (Input area) Load: 2.45 N, Speed: 3 times/s, 50000 hitting strokes, Polyethylene pen (Tip: R0.8) or silicone rubber pen (Tip: R8)
Sliding durability (Input area) Load 2.45 N, Speed: 210 mm/s, 50000 linear sliding motions, Polyethylene pen (Tip: R0.8) or silicone rubber pen (Tip: R8)
High-temperature preservation 70 °C ,     240 h
Low-temperature preservation -30 °C ,    240 h
High temperature & high humidity preservation 60 °C , 90 % , 240 h
Heat shock test assurance 100cycles, 1 cycle: -30°C (30 min) → 70°C (30 min)
※Standardized product
caution Note on the characteristic data given - Data on the characteristics of the products described in this page based on the results of evaluations carried out by the company. This does not guarantee that the characteristics of the product conform with your usage environment. Before use, review the usage conditions based on evaluation data obtained from the equipment and substrates actually used.