G9052 | PET carrier type double coated tapes | Double coated tapes | Products | Sony Chemical & Information Device Corporation



	General-purposedouble coated tapes Removable typedouble coated tapes Impact force resistant typedouble coated tapes Strong adhesive typedouble coated tapes Flame retardant typedouble coated tapes Special resin-base hotmelt adhesive tapes Double coated tapesfor LCD modules PET carrier typedouble coated tapes Strong glass meshcarrier type double coated tapes Adhesive transfer tapes Adhesive transfer tapesfor FPC Heat resistantadhesive transfer tapes for FPC Adhesive transfer tapesfor FPC & general-purpose Low outgasadhesive transfer tapes Strong adhesivetransfer tapes Nitrile rubber base hotmelt adhesive tapes(non-carrier type)Special resin-basehotmelt adhesive tapes(non-carrier type)Thermosetting tapes for FPC Polyester resinbase hotmelt adhesive tapes(non-carrier type)Conductive adhesivetransfer tapes Thermal conductiveadhesive transfer tapes

		PET carrier type double coated tapes
		For applications that need to be dimensionally stable and thin.

Double coated tapes

Please select the product name :
G9050 G9051 G9052 G9953 G9954

	G9052


	For fixing thin parts


	Computers / AV / Cellular phones


	Environmentally friendly non-solvent manufacturing method. High adhesive quality (heat resistance and weather resistance) for wide ranging applications. Good holding power even at high temperature. PET based. Suitable for fine processing work where elasticity is required.

Product name	G9052
Main component	Acrylic base
Carrier	12 µm PET
Color	Transparent
Adhesive thickness(µm)	About 85
Release paper thickness(µm)	About 150
Bonding strength(N/20mm)	15
St'd size (width & length)	500mm x 50m

UL certificated. UL file NO.MH15431




			For adhesion of cushion materials such as urethane.



Top of page

1.Holding Power at different temperatures

Holding power test

Test Piece Condition

Substrate:	Stainless steel plate(SUS304)
Bonding area:	25mm x 25mm
Bonding condition:	One stroke with 2-kg roller
Backing material:	25 µm PET

[Left at RT for one hour and then at each temperature for 30 minutes before measurement]
[Creep length after one hour application of 1-kg load]

Results

Holding Power(mm)	40°C	80°C
Holding Power(mm)	0.2	0.2

2.Bonding strength on various type of substrate (180° peeling)

180°Peeling strength test

Test Piece Condition

Tape width:	20mm
Bonding condition:	One stroke with 2-kg roller
Measuring condition:	23°C±5°C 60%±20%RH
Peel speed:	300mm/min
Backing material:	25 µm PET

[Left at RT for one hour before measurement]

Results


	(N/20mm)

Peeling strength	SUS	ABS
Peeling strength	15.3 AF	7.2 AF

Top of page

The technical data in this document, which was acquired based on reliable tests, does not guarantee full performance as per the documentation in any instance. Users assume total responsibility and risk for use of this product for any purpose under any usage conditions.