T4410 | Low outgas adhesive transfer tapes | Double coated tapes | Products | Sony Chemical & Information Device Corporation



	General-purposedouble coated tapes Removable typedouble coated tapes Impact force resistant typedouble coated tapes Strong adhesive typedouble coated tapes Flame retardant typedouble coated tapes Special resin-base hotmelt adhesive tapes Double coated tapesfor LCD modules PET carrier typedouble coated tapes Strong glass meshcarrier type double coated tapes Adhesive transfer tapes Adhesive transfer tapesfor FPC Heat resistantadhesive transfer tapes for FPC Adhesive transfer tapesfor FPC & general-purpose Low outgasadhesive transfer tapes Strong adhesivetransfer tapes Nitrile rubber base hotmelt adhesive tapes(non-carrier type)Special resin-basehotmelt adhesive tapes(non-carrier type)Thermosetting tapes for FPC Polyester resinbase hotmelt adhesive tapes(non-carrier type)Conductive adhesivetransfer tapes Thermal conductiveadhesive transfer tapes

		Low outgas adhesive transfer tapes
		Double coated tapes with low outgas. Excellent damper effect.

Double coated tapes

Please select the product name :
T4410 T4411

	T4410


	For fixing of HDD metal damper and foam insulator.


	Computers


	Adhesive itself has high vibration suppression effects. Low outgas produced. Highly adhesive to SUS, aluminum and plastic materials.

Product name	T4410
Main component	Acrylic base
Carrier	Non-carrier
Color	Semi transparent
Adhesive thickness(µm)	About 95
Release paper thickness (µm)	About 135
Bonding strength(N/20mm)	10
St'd size (width & length)	500mm x 100m




			For fixing of HDD metal damper and foam insulator.



Top of page

1.Gas produced

Test Piece Condition

Outgas analysis:	Headspace gas chromatograph method (Standard: Tetradecane)

Results

Coating thickness(µm)	Amount of gas produced (µg/100cm²)	Usage
95	2.3	Metal damper

2.Bonding strength on various type of substrate (180° peeling)

180°Peeling strength test

Test Piece Condition

Tape width:	20mm
Bonding condition:	One stroke with 2-kg roller
Measuring condition:	23°C±5°C 60%±20%RH
Peel speed:	300mm/min
Backing material:	25 µm PET

[Left at RT for one hour before measurement]

Results

Unit(N/20mm)

Aluminum	Glass	Polycarbonate	Polystyrene	Acrylic	PVC	ABS	PP
10.6	9.5	11.8	8.7	10.6	9.5	11.8	8.7

Top of page

The technical data in this document, which was acquired based on reliable tests, does not guarantee full performance as per the documentation in any instance. Users assume total responsibility and risk for use of this product for any purpose under any usage conditions.