Strong adhesive type double coated tapes
Strong adhesive tape series with different-thickness nonwoven fabric carrier produced using non-solvent manufacturing method.
Products Category Double coated tapes
Please select the product name :
Comparison
UT1015BU

Product name

 UT1015BU

Suitable use

 For strong adhesion.

Application

 Computers / AV / Cellular phones

Features
  • About twice the adhesion strength of our G-series tapes. Suitable for adhesion to plastic or metal parts.
  • Good holding power even at elevated temperature.
  • Environmentally friendly non-solvent manufacturing method.
 
non-solvent manufacturing method
 
   

Structure

Specifications
Product name UT1015BU
Main component Acrylic base
Carrier Nonwoven fabric
Color Semi transparent
Adhesive thickness(µm) About 150
Release paper thickness (µm) About 130
Bonding strength(N/20mm) 27
St'd size (width & length) 480mm x 50m

※UL certificated. UL file NO.MH15431

Application Example
Application Example
For sites where thickness is limited and high adhesive strength is required.
Top of page

Technical Data
1.Bonding strength on various type of substrate (90° peeling) 90°Peeling strength test
Test Piece Condition
Tape width: 20mm
Bonding condition: One stroke with 2-kg roller
Measuring condition: 23°C±5°C 60%±20%RH
Peel speed: 300mm/min
Backing material: 40µm Aluminum foil
  • [ Left at RT for one hour before measurement ]
Results
(N/20mm)
Substrate SUS Steel Aluminum Copper ABS PC Acrylic
90° peeling
strength		 27.2 28.0 16.8 27.7 12.6 14.0 16.0
2.Holding Power at different temperatures Holding power test
Test Piece Condition
Substrate: Stainless steel plate (SUS304)
Bonding area: 25mm x 25mm
Bonding condition: One stroke with 2-kg roller
Backing material: 40µm Aluminum foil
Weight: 1-kg
  • [ Left at RT for one hour and then at each temperature for 30 minutes before measurement ]
  • [ Creep length after one-hour application of 1-kg load ]
Results
  40°C 80°C 120°C
Holding Power (mm) 0.2 0.8 1.0
3.Reliability of bonding strength under different conditions (90° peeling)
90°Peeling strength test
Test Piece Condition
Substrate: Stainless steel plate (SUS304)
Tape width: 20mm
Bonding condition: One stroke with 2-kg roller
Peel speed: 300mm/min 
Backing material: 25µm PET
  • [Measures after 4-hour or more neglect to RT after aging. ]
Results
(N/20mm)
90° peeling strength Initial 1Week 2Weeks 4Weeks
Heat resistance 70°C 27.2 46.4 41.2 37.5
Heat & moisture resistance 60°C95%RH 27.2 46.1 46.4 47.8
Water resistance Under water at 40°C 27.2 31.4 31.9 31.9
G[WO㔍x
Top of page
caution The technical data in this document, which was acquired based on reliable tests, does not guarantee full performance as per the documentation in any instance. Users assume total responsibility and risk for use of this product for any purpose under any usage conditions.