Products

Silicone-rubber base flame retardant adhesives

Adhesive series for fixing electronic devices with outstanding electrical properties and approval of flame retardant grade (V-0) and UL Standard.


Comparison

Please select the product name :



image

Product Name

 SC950

Suitable use

 For fixing electronic devices and insulation

Application
  • Computers/
  • AV/
  • Cellular phones

Features
  • UL94 V-0 certified (No. E63260)
  • Non-corrosive single component adhesive which cures rapidly at room temperature, conforming to the MIL-A46146B corrosion test.
  • Excellent thermal dissipation performance, its thermal conductivity is five to ten times higher than that of traditional silicone resin.
  • Retains rubber elasticity and adhesiveness in a temperature range -55 to +200

Specifications

Product Name SC950
Main component Silicone rubber base
Color Gray
Property Non-liquidity paste
Solid content(%) 97% or higher
Specific gravity About 1.3
Diluent -
Container 130g tube 333ml cartridge

* UL Certificated. UL file No. E63260

Application Example

  • Bonding and sealing of high-voltage components or TV parts that require Frame retardancy.
  • Sealing for waterproofing, dust proofing, and damping; mounting; and bonding in home electrical appliances, communication devices, or measuring instruments
  • General joining of metals, glasses or plastics
Top of page

Technical Data

1.Property after curing


Test Piece condition
Curing condition: 23±5°C 60±20%RH x 7days
Results
Specific gravity About 1.3
Hardness(Type A Durometer) 30 to 60
Tensile strength 28 N/cm²
Elongation 100% or more
Frame retardancy resistance UL94 V-0
Corrosion (MIL-A-46146B) No corrosion

2.Electrical property


Results
Volume resistivity 1.0X1010 Ωcm or higher
dielectric strength 18 KV/mm or higher
Dielectric constant (60Hz) 5.0 or lower
Dissipation factor (60Hz) 0.05% or lower

3.Bonding strength (shear strength)


Test Piece condition
Curing condition: 23±5°C 60±20%RH x 7days
Thickness of adhesive: 1mm
Bonding area: 20mm x 10mm
Measuring condition: 23±5°C 60±20%RH
Peeling speed: 10mm/min
Results
Aluminum 220
Stainless steel 200
Mild steel 200
Brass 200
Glass 220
Phenolic resin 180
Epoxy resin 220
Polyester resin 210
Polycarbonate 190
Polyethylene 90
ABS Resin 230
Polyamide 200
Acrylic resin 100
PPS Resin 190
PBT Resin 180
Noryl 170
Rigid PVC 150

The product does not induce cracks, corrosion or any other adverse effects in the bonded material

Top of page

[Firefighting laws applicable:]

  • The product is not classified as a dangerous material.
  • The product is classified as a designated combustible solid; storage of an amount of three tons or more requires notification to relevant authorities.
Top of page

Notes

  1. Check before operation
    Check the relevant material safety data sheet (MSDS) and instruction manuals for precautions required for operation.
  2. Operation environment
    - Keep ignition sources away.
    - Use a local ventilator to ensure sufficient air circulation.
  3. First aid
    - Learn action to take from the MSDS and instruction manuals.
    - In case of eye contact, vapor inhalation or swallowing, seek medical attention immediately.
  4. Storage
    Store the product in a tightly closed container in a predetermined place at room temperature avoiding direct sunlight.
  5. Prohibition of unintended use
    Never use the product except as an adhesive.
Top of page
coution
Note on the characteristic data given - Data on the characteristics of the products described in this page based on the results of evaluations carried out by the company. This does not guarantee that the characteristics of the product conform with your usage environment. Before use, review the usage conditions based on evaluation data obtained from the equipment and substrates actually used.